PrinterST-310FM2G Guide type Manual cream solder printer

ST-310FM2G

Features

Since the printing angle / printing pressure is set and maintained mechanically, the worker can concentrate on squeezing speed and plate separation. ST - 310F1G M size compatible version, ST-310FM2G which can be used as a simple screen printing machine.

  • It can be used for 0603 chip parts, 0.5 pitch BGA printing.
  • The plate is adjustable X, Y, Theta with a dial.
  • Work holder and suction base can be installed.

Spec

Mask frame size Recommendation: W550 X D650, H20 to 30 [mm]
Work base size About W320 X D450 (work size max 250 X 330)
Mask alignment Manual adjustment, Dial X / Y ± 3.0 mm Theta ± 2° (micrometer)
Mask release Manual front opening / closing type
Print method Manual printing
Print configuration
  • Squeegee: L = 300 mm, Hardness 75 to 80, urethane double squeegee
  • Squeegee drive: double squeegee air cylinder type
  • Printing pressure: Air regulator formula
  • Printing angle: 45° to 55°
body size Width 600 X depth 960 X height 410 [mm] (Including damper cover)
weight About 46 [kg]
Air 0.4 to 0.6 MPa

Top of Page.