ReflowSAR-500A/N2 Static AIR Reflow furnace

SAR-500A/N2

N2 corresponding,
desktop static reflow furnace

Features

  • Full-fledged profiles are possible Equivalent performance to a large conveyor reflow oven, yet small desktop size.
    • For each profile, heating setting up to 10 zones
    • Up to 10 profiles can be set
    • Profile setting and control are touch panel type and simple
    • The temperature transition is rendered sequentially on the touch panel
    • Record on dedicated control software and export in CSV format
  • Reflow state can be observed from the side window
  • Lead-free and high-temperature solder compatible
  • Space saving for desktop type
  • Simple operation just filling in ideal profile with PID auto tuning function
  • Uses hot air method without using general IR infrared type

Spec

Model SAR-500N2 (N2 and air)
SAR-500A (air)
body size Width 1010 X depth 700 X height (620) [mm] (excluding protrusions)
weight About 130 [kg]
Work size Maximum 330 X 250 [mm]
Heating method Hot air system
Work temperature rise capability Heating from room temperature to 260℃ in about 50 seconds (250 X 250 mm, t=1.6 G-10)
Temperature distribution Within approximately ±10°C (excluding sensor error) at the inner 200 × 200 mm area of a 250 × 250 mm workpiece.
Temperature accuracy ± 2.5% or ± 5 ° C greater than setting display value in direct control ± 1 dge
Profile Setting point 10 For zone profile, 100 patterns
Power supply / air AC 200 V (Three phase), About 7kVA, Factory air: 0.4 to 0.6 [Mpa]
Nitrogen supply (N2 type) Flow meter 100 [L / min] (with 2 cores) 200 [L / min] 100 [PPm] or less at 8 minutes of supply

Top of Page.