DipcoVer DC type

ORDER: Distributors
DC type image

Features

  • Controls circuit board warpage caused by factors such as heat and prevents solder fogging.
  • This protects the circuit board card edge connector part (connector part) from solder and static electricity.
  • This can temporarily protect areas such as the pilot hole cover of the on-board connector attached to the circuit board edge surface.
  • Compatible with Rohs.
Carrier hold Prevention of circuit board warpage Prevention of solder fogging Flow tank Reflow oven Cutter
excellent relatively poor relatively poor excellent
Possible to use		 relatively poor
Can be used		 good
Possible to use

Product Specifications

Corresponding circuit board thickness (t) Thickness: 1.6mm Can be used at a ± 0.1 dipping depth ≤ t
Heatresistance 260ﾟC within 2 minutes/ (without pressurization) max
Number of Uses Over 200 times (used repeatedly at 245ﾟC soldering at a 4 second interval)
Rohs Compatible

Standard Size List

Model Number Length(A) Insertion Depth (B) Corresponding circuit board thickness (t) Shape
DC-05507 55mm 7.0mm 1.6mm
DC-10007 100mm
DC-12007 120mm
DC-15507 155mm
DC-17007 170mm
DC-20007 200mm
DC-22007 220mm
DC-24007 240mm
DC-26007 260mm
DC-28007 280mm
DC-30007 300mm
DC-32007 320mm

Precautions when using

  • Solder may adhere depending on the usage.
  • Immediately remove after soldering.
  • Make judgment on the lifespan based on the dimensions and deformation of the opening parts and the amount of exfoliation in the coating.
Top of Page.