PrinterST-320F Semi Automatic cream solder printer

ST-320F

Features

  • Print condition setting: Print pressure, angle, speed, left-right balance
  • Easy to align: X, Y, Theta fine-tone dial formula
  • Gap setting: Fine adjustment of the gap between printing surface and plate surface
  • option: Work holder, suction base

Spec

Mask frame size Recommendation: W300 X D390 ~ W360 X D450, H20 to 30 [mm]
Work base size About W260 X D330 X t6 (aluminum flat plate)
Mask alignment Manual adjustment, Dial X / Y ± 3.0 mm Theta ± 2° (micrometer)
Mask release Motor type (2 stage setting type), front opening / closing type
Print method Automatic printing by motor
Print configuration
  • Squeegee: L = 250 mm, Hardness 70 to 80, urethane double squeegee
  • Squeegee drive: double squeegee motor type
  • Printing pressure: Air regulator formula
  • Printing angle: 45° to 55°
  • Printing speed: 1 ~ 50 [mm/s]
body size Width 570 X depth 800 X height 420 [mm]
weight About 70 [kg]
Power supply / Air AC 100 V, 50/60 Hz, 0.4 to 0.6 MPa

Top of Page.